> Jim Couch wrote:
>
> > One other thing to note, the 85/2 uses 49mm filters vs the 55mm
> > filters used on the 100/2. My "indoor low light" kit consists of a
> > 28/2, 50/1.8, and 85/2, a very compact set of lenses that all use 49mm
> > filters. (Or at least did until the 28 got dropped over the holidays -
> > now it does not use filters, the filter ring is dented!) :)
>
> My 28/2 has a dented filter ring too. I didn't do it, it was one of only
> a couple of bad 'Bay transactions I've had. What is the wisdom of the
> list about the best way to undent a filter ring??
>
> Moose
I have just taken out a dent on an Olympus RC, that was quite severe. I used
the method of cutting a piece of wood board to the shape of the outside of
the lens, then using a hammer with a piece of somewhat pointed wood dowel as
a punch, and slowly and carefully formed the rim back to meet the shape of
the wood. To get the exact shape and curve of the lens onto the board, I
just used a 43.5mm filter as a template, then cut it out with a jig saw.
My repair is not perfect, as the filter threads were slightly damaged by
someone else attempting the repair before I started. I can get a filter on,
but with great difficulty only. Now what I need is a 43.5mm (stacking)
filter that I can take the glass out of, and mount it more or less
permanently on the front of the lens for a new set of filter threads.
So I have 2 requests for WTB: 1. any 43.5mm filter with double threads that
is cheap, even with marred glass, as I plan to throw the glass away anyways.
2. self-timer lever for 35RC, metal variety.
Wayne
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|