Micro-Tools/Curt Fargo lists two possibilities:
A wooden block with semicircular cutouts of varying sizes, with a shaped
wooden stake to push out the dent.
A vice with outward facing convex jaws to "screw" out the dent.
The second seems to me to be more likely to work - but I can't speak from
experience - though it isn't cheap.
The first might be the model for a home-brew solution?
Piers
-----Original Message-----
From: owner-olympus@xxxxxxxxxxxxxxx [mailto:owner-olympus@xxxxxxxxxxxxxxx]
On Behalf Of Moose
Sent: 06 January 2004 09:13
To: olympus@xxxxxxxxxxxxxxx
Subject: Re: [OM] 100 vs. 100
--snip
My 28/2 has a dented filter ring too. I didn't do it, it was one of only a
couple of bad 'Bay transactions I've had. What is the wisdom of the list
about the best way to undent a filter ring??
Moose
< This message was delivered via the Olympus Mailing List > < For questions,
mailto:owner-olympus@xxxxxxxxxxxxxxx > < Web Page:
http://Zuiko.sls.bc.ca/swright/olympuslist.html >
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|