I have seen some bent so much that they can't possible push the lever as far
as they should. Adjust to fit.
_________________________________
John Hermanson www.zuiko.com
Camtech, Olympus Sales & Service since 1977
New OM & Used, Digital, Pearlcorders, Binoculars
21 South Lane, Huntington NY 11743-4714
631-424-2121
_________________________________
----- Original Message -----
From: "dreammoose" <dreammoose@xxxxxxxxx>
To: <olympus@xxxxxxxxxxxxxxx>
Sent: Sunday, January 27, 2002 9:43 PM
Subject: Re: [OM] Questionable 85/2 on the bay
> Hey Mark, the scan is perfect. I can see that my DOF lever is indeed
> bent a little, putting the end about 4+ mm from the diaphragm coupling
> lever. I'll figure out how to gently bend it back
> I've copied the .jpg, so you can take it off your web site.
>
> Thanks again for the special effort to help,
>
> Moose
>
> Mark Dapoz wrote:
>
> >The DOF lever should be within 1-2mm of the diaphragm coupling lever. I
> >pulled my mount off and scanned it as best I could on my flatbed scanner.
> >You can see what it should look like here:
> > http://olympus.dementia.org/misc/85_mount.jpg
> >
>
>
> < This message was delivered via the Olympus Mailing List >
> < For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
> < Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
>
>
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|
