Mike, do you have a tool rental business nearby? You might call and ask
if they have the strap device, half-inch drive and cheater pipe
available for rent.
On 12/14/20 5:37 PM, Mike Gordon via olympus wrote:
I always dread the time to change out the filters. I have two Aquapure AP802 housings in
front of my softener---bypassed for the hoses and orchids; latter with on-demand heater.
I have triflow faucets upstairs and downstairs with RO water for the sensitive orchids
upstairs. My design, of course, and has worked like a charm. Marnie says I need to
stick to "theoretical plumbing." I fear she may be correct.
It is always a struggle to get these buggers off. The plumber had the
foresight to put in a drain valve on the line so I can totally release the
pressure instead of those puny release valves.
I have always been able to finagle them off using two of the plastic casing
wrenches together, with a rubber mallet. If I can get them to budge a mm,
they will give way in about 5min of coercion. I had used food grade silicon
grease on the threads each time.
I try not to over tighten. I don't change q 6mos as that is overkill given the
size of the filters and our usage. I haven't tried the hair dryer trick yet.
I may get that strap wrench but only have a 3/8 inch ratchet. I think there
are adapters. Perhaps a PVC pipe as leverage bar on the wrenches. If they
provided really THICK metal custom wrenches with a long handle, I doubt this
would be an issue. Instead crummy flimsy plastic ones or too thin metal ones
that just ruin the plastic housing. Bah. If I call Luke, the master plumber,
it is 150 bucks to step in the door and that is surrender.
https://www.youtube.com/watch?v=tmGZCqKts8M
It just won't budge, Mike
--
Jim Nichols
Tullahoma, TN USA
--
_________________________________________________________________
Options: http://lists.thomasclausen.net/mailman/listinfo/olympus
Archives: http://lists.thomasclausen.net/mailman/private/olympus/
Themed Olympus Photo Exhibition: http://www.tope.nl/
|