And there is no direct relationship with the lens other than the fixed
2% of the image area is reading a larger or smaller angle depending on
the lens focal length. The spot area at 2% of the frame should be
approx. 4.7mm diameter and the diagonal of the film frame is 43mm so the
linear coverage of the field of view is 4.7/43 = 10.9%. You should be
able to figure out the angular coverage of the meter given the angular
coverage of the lens using that percentage. A 50mm sees a field of 47
degrees so the meter should see 5.1 degrees.
Chuck Norcutt
Winsor Crosby wrote:
> It is a true spot meter reading only 2% of the image area. It reads a
> circle slightly smaller than the focusing aid on the 2-13 screen. I
> always used the inside split image circle as the best approximation.
> That is probably not accurate, but close enough. You can seen the
> sensitive area in the 1-4n screen on this page:
>
> http://olympus.dementia.org/eSIF/om-sif/findergroup/focusingscreens.htm
>
>
>
> Winsor
> Long Beach, California, USA
>
>
>
>
> On May 19, 2007, at 10:37 AM, OM4 Land wrote:
>
>> Hi all:
>>
>> It seems everywhere I look I find different information regarding
>> the size of the metered zone of the spot meter. Can someone set the
>> record straight?
>>
>> What is the relationship between the spot and the focus aid of a
>> 2-13 focusing screen with a Zuiko 50mm f-1.8?
>>
>> How about 28mm f-2.8 and 100mm 2.8?
>>
>> Thanks
>
>
>
> ==============================================
> List usage info: http://www.zuikoholic.com
> List nannies: olympusadmin@xxxxxxxxxx
> ==============================================
>
>
>
==============================================
List usage info: http://www.zuikoholic.com
List nannies: olympusadmin@xxxxxxxxxx
==============================================
|