Sparks leather all comes as self stick (adhesive is better than factory,
btw). No extra glue is ever used, so that would not be the cause of the
back not opening.
----------------------------------------------------
John Hermanson www.zuiko.com
mail: omtech@xxxxxxxxx
Camtech, Olympus Sales & Service since 1977
21 South Lane, Huntington NY 11743-4714
631-424-2121 Turnaround 4-5 weeks
Closed 12/19 thru 1/2/04
----------------------------------------------------
----- Original Message -----
From: "iwert" <zuiko@xxxxx>
To: <olympus@xxxxxxxxxxxxxxx>
Sent: Friday, December 19, 2003 6:08 PM
Subject: Re: [OM] My OM-4Ti on eBay PLEASE HELP!
> Hi John,
>
> Since the camera is reskinned it could be that the latch mechanism is
glued?
> You could try to remove the skin from the frontside right and see if that
> helps...
>
> Iwert.
>
>
> on 19-12-2003 20:29, John W. Sloane, DMD at bimmerdoc325ci@xxxxxxxxxxxxxx
> wrote:
>
> > Hi, All,
> >
> > I was just re-checking my Black 4Ti "Peacock" that I had listed on eBay,
> > getting ready to put it in the box, and ended the listing. I tried to
open
> > the back, and it won't open. When I pull the knob up to open it, it
pulls up
> > perhaps a little farther than normal, offering no resistance, and to the
> > point where the small indented ring machined into the shaft pulls up
about
> > 1/8" or so, which seems about right, but nothing seems to be engaging
the
> > spring unlocking mechanism for the back. Normally, the mechanism
engages at
> > the point where the little indentation in the shaft first becomes
visible.
> > Any ideas??? John H.???
> >
> > Thanks,
> > John
> >
> > John W. Sloane, DMD
> >
> >
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|