Hi John,
Since the camera is reskinned it could be that the latch mechanism is glued?
You could try to remove the skin from the frontside right and see if that
helps...
Iwert.
on 19-12-2003 20:29, John W. Sloane, DMD at bimmerdoc325ci@xxxxxxxxxxxxxx
wrote:
> Hi, All,
>
> I was just re-checking my Black 4Ti "Peacock" that I had listed on eBay,
> getting ready to put it in the box, and ended the listing. I tried to open
> the back, and it won't open. When I pull the knob up to open it, it pulls up
> perhaps a little farther than normal, offering no resistance, and to the
> point where the small indented ring machined into the shaft pulls up about
> 1/8" or so, which seems about right, but nothing seems to be engaging the
> spring unlocking mechanism for the back. Normally, the mechanism engages at
> the point where the little indentation in the shaft first becomes visible.
> Any ideas??? John H.???
>
> Thanks,
> John
>
> John W. Sloane, DMD
>
>
>
> < This message was delivered via the Olympus Mailing List >
> < For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
> < Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
>
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|