That is a very odd problem. Does the motor behave this way on all bodies?
The timing of the switch should only affect whether single/sequence work at
the proper click position on the switch. hmmm
John Hermanson
___________________________________
http://www.zuiko.com
Camtech, Olympus Service since 1977.
21 South Lane, Huntington NY 11743-4714
Phone/fax 631-424-2121
Free Olympus Manuals: 1-800-221-3000
___________________________________
----- Original Message -----
From: "Hans van Veluwen" <hcvanveluwen@xxxxxxxxx>
To: <olympus@xxxxxxxxxxxxxxx>
Sent: Saturday, March 24, 2001 6:58 AM
Subject: Re: [OM] Help: Odd behavior from MD1
| :I installed NiMH batteries in an old 15V Control Pack and everything
worked
| :fine after I got it back together. Now, however, when I put the Control
Pack
| :on an MD1 and turn it on, either in single of continuous mode, it starts
| :shooting continuously.
|
| This probably means that the tuning ('re-timing'), as explained in the
repair
| FAQ, isn't done properly or that the centre post which is used for this
tuning
| wasn't tightened enough and has come loose.
|
| hnz
|
|
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|