Will sure keep you posted when I get around to doing this.
Regards
Titoy
----- Original Message -----
From: C.H.Ling <chling@xxxxxxxxxxxx>
To: <olympus@xxxxxxxxxxxxxxx>
Sent: Monday, February 12, 2001 10:24 AM
Subject: Re: [OM] A Flatbed Question
> Titory,
>
> I'm glad to share my limited experience, it would be nice to hear your
> result since we can also learn from it. Some more point to note is the
> scanner's noise increase very fast with time of running, better to
> cool it down by opening the window and don't play to long before
> getting the final scan. The problem is very noticeable with slide and
> negative, reflective may be less. Also, try some different sharpening
> values to see which work best, it is very important for getting a
> sharp looking print.
>
> C.H.Ling
>
>
>
> Clemente Colayco wrote:
> >
> > Dear Mr Ling:
> >
> > I am really amazed at the great depth of knowledge you have. Your reply
> > explains in a very brief but thorough manner what I have long wondered
> > about. Now I will try your suggestion and scan a very good print I made
on
> > an 8 x 10 and see what happens. If you care, I will keep you posted.
> >
> > Regards
> >
> > Titoy
> >
>
> < This message was delivered via the Olympus Mailing List >
> < For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
> < Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
>
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|