Tim -
I don't know if it matters, but the T-32 and BG2 both use the same
transformer - but I'll have to check to see if the oscillation circuits
are the same or not.
HI100@xxxxxxx wrote:
>
> clintonr@xxxxxxxxxxxxxxxx writes:
>
> << The oscillator circuit in a Power Bounce Grip 2 is essentially the same
> as the oscillator in a T-32 flash.
> >>
> Except that the BG2 has a voltage feedback loop that stabilises the output
> voltage a bit better and probably helps the unit charge the flash a bit
> quicker (since the transformer can have higher turns ratio than would
> otherwise apply).
>
> Regards,
> Tim Hughes
> >>Hi100@xxxxxxx<<
>
> < This message was delivered via the Olympus Mailing List >
> < For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
> < Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|