Olympus-OM
[Top] [All Lists]

Re: [OM] TTL multiconnector

Subject: Re: [OM] TTL multiconnector
From: "John Hermanson" <omtech@xxxxxxxxx>
Date: Wed, 29 Sep 1999 20:24:06 -0400
Does the F280 shoe have a similar pin layout to a T flash?  I've never seen
one.  I'd think that since a plain TTL cord won't fit the 280 socket, that
it was probably made not to work properly in plain TTL mode with other T
flashes in the loop.

John
----------------------------------------------------------------
Camtech / Olympus Service since 1977
21 South La., Huntington NY 11743-4714
516-424-2121     http://www.zuiko.com
--------------------------------------------------------------
----- Original Message -----
From: LARS BUNDESEN <lars.bundesen@xxxxxxxxxx>
To: <olympus@xxxxxxxxxxxxxxx>
Sent: Wednesday, September 29, 1999 4:14 PM
Subject: Sv: [OM] TTL multiconnector


> The manual for the F 280 says (first Q in the Q&A section) that the F280
> can't be used with other flashes. Even if you can connect the F280 on the
> hot shoe and a T32 via a cable, the problem is probably different electric
> voltage or something. I haven't tried this combunation, I don't wanna fry
> the electronics in my 4T.
>
> So you'd better use the F280 alone.
>
> I have often used the multi connector with 2 T32s thru photo umbrellas.
> Easy set up and great for even lit portraits of children.
>
> Lars Bundesen
>
> ----------
> > Fra: Pauls0627@xxxxxxx
> > Til: olympus@xxxxxxxxxxxxxxx
> > Emne: Re: [OM] TTL multiconnector
> > Dato: 29. september 1999 15:41
> >
> > In a message dated 9/29/99 9:35:33 AM Eastern Daylight Time,
> > leopoldo.rodriguez@xxxxxxxxxxxxx writes:
> >
> > > Has anyone ever used an TTL multiconnector to link several OM flashes?
> > >  If so, would it work with different units, let say F280 and T32, when
> set
> > to
> > > OTF control?
> >
> > I use mine with T32s and T20s. I think you may need a special cable for
> the
> > F280. The F280 has a seven pin connector, while the T series flashes
(and
> the
> > multiconnector) use the 5 pin TTL connector. With the right cable for
the
>
> > F280 you should be fine.
> >
> > Paul Schings
> >
> > < This message was delivered via the Olympus Mailing List >
> > < For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
> > < Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
> >
>
> < This message was delivered via the Olympus Mailing List >
> < For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
> < Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
>


< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >


<Prev in Thread] Current Thread [Next in Thread>
Sponsored by Tako
Impressum | Datenschutz