The manual for the F 280 says (first Q in the Q&A section) that the F280
can't be used with other flashes. Even if you can connect the F280 on the
hot shoe and a T32 via a cable, the problem is probably different electric
voltage or something. I haven't tried this combunation, I don't wanna fry
the electronics in my 4T.
So you'd better use the F280 alone.
I have often used the multi connector with 2 T32s thru photo umbrellas.
Easy set up and great for even lit portraits of children.
Lars Bundesen
----------
> Fra: Pauls0627@xxxxxxx
> Til: olympus@xxxxxxxxxxxxxxx
> Emne: Re: [OM] TTL multiconnector
> Dato: 29. september 1999 15:41
>
> In a message dated 9/29/99 9:35:33 AM Eastern Daylight Time,
> leopoldo.rodriguez@xxxxxxxxxxxxx writes:
>
> > Has anyone ever used an TTL multiconnector to link several OM flashes?
> > If so, would it work with different units, let say F280 and T32, when
set
> to
> > OTF control?
>
> I use mine with T32s and T20s. I think you may need a special cable for
the
> F280. The F280 has a seven pin connector, while the T series flashes (and
the
> multiconnector) use the 5 pin TTL connector. With the right cable for the
> F280 you should be fine.
>
> Paul Schings
>
> < This message was delivered via the Olympus Mailing List >
> < For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
> < Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
>
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|