Michael;
Call Oly in NY. They'll probably send an F280 manual, gratis.
George
Michael O'Carrigan wrote:
>
> >For those who read the first set of *incorrect* instructions . . . here is
> >a *corrected* set and an apology for any confusion caused:
> >
> >Here is how I do it with the same combo of OM-4 and T-20, T-32 *and* F-280
> >using TTL OTF mode:
> >
> >1. Make sure the camera is in Auto mode with the ASA set for the film
> >speed you are using, and the EV compensation ring on the ASA dial is set to
> >ZERO.
> >
> >2. Mount the flash to the camera but leave it *OFF*.
> >
> >3. Aim at your subject, focus, and with the flash unit *OFF*, adjust the
> >aperture ring until you get a 1/60th shutter speed.
> >
> >Note: This is the sync speed for the flash unit and you will also be
> >properly exposed without any flash for the scene's ambient lighting.
> >
> >4. Turn the flash ON to TTL Auto Mode.
> >
> >Note: This "locks" the camera at 1/60th so the shutter speed cannot change
> >and the overall scene will stay properly exposed for ambient lighting.
> >
> >5. Turn the EV compensation ring (without lifting it) clockwise from -2/3
> >to -2 compensation depending on how much fill you want.
> >
> >Note: The dial moves in 1/3 stop increments. If you are compensating for
> >mottled shadowing caused by small tree branches over an otherwise sunlit
> >subject, you probably want more fill (-2/3 to -1). If you want only to
> >make eyes sparkle and enhance contrast slightly on a deep overcast day, you
> >probably want less fill (-1-1/3 to -2). Experience in doing this will
> >develop a sense of how much fill *you* want. Everyone's preferences are
> >different. This "fools" the TTL OTF metering into thinking the film needs
> >less light from the flash.
> >
> >6. Shoot the number of frames you wish of the subject. Repeat steps 3 - 5
> >if ambient lighting changes.
> >
> >7. Remember to turn the flash OFF and reset the compensation dial to ZERO
> >when you are done with fill flash.
> >
> >To reiterate what you have done. You are using the aperture ring to find a
> >proper non-flash exposure at 1/60th second for the overall scene. You are
> >then fooling the flash unit and TTL metering combination into thinking you
> >need less light. However, the camera will remain locked at 1/60th shutter
> >speed as soon as the flash has charged.
> >
> >I recommend you try this with a victim, er subject , on some non-critical
> >photographs and experiment with different fill levels (compensation dial
> >settings) both in mottled shade with bright sunlight and under deep
> >overcast. Keep records of what you did for each frame and then look at the
> >results. You can then choose what settings please you most for your own
> >fill-flash work.
> >
> >Fortunately the OM-2[n, sp] and OM-4[t] can use the TTL Auto mode on the
> >T-20, T-32 and T-45. This method should also work if you are using an
> >F-280 as its only "auto" mode is TTL Auto. There is a different way to do
> >this with a T-20 or T-32 in Normal Auto (using the sensor on the front of
> >the flash unit) but it is more complicated and more difficult to control
> >how much fill you get.
> >
> >-- John
>
> Thanks for the posting re: T32 fill flash in daylight.
>
> I think this area of photography (flash control) is the hardest to become
> familiar with. Correct fill flash with a T32 and an OM 2n (or above) has
> always been a "hit amd miss" exercise with me.
>
> I have till now used my OM2n/T32 on Manual, GN 16 or 32, 1/60 shutter speed
> and adjusted the F/Stop according to the distance from the victim. Results
> are usually good.
>
> When using your set-up what is the significance of leaving the T32 off
> untill the camera settings are made? Wont the OM2n stay on 1/60 if the
> viewfinder needle says so, even if the compensation ring is turned? What
> effect on the camera does leaving the flash ON or OFF have?
>
> I have an F280 and OM3Ti but have never used them together as a daylight
> flash combo. As I dont have a manual for the F280 I dont know the correct
> process for setting up for fill flash. But then again I have a manual for
> the T32 and it does not explain anything in much detail and certainly not
> the procedure you submitted.
>
> Michael.
>
> < This message was delivered via the Olympus Mailing List >
> < For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
> < Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|