If your 10 is not working with a Winder 1 or 2 (NOT Motor Drive 1 or 2),
then it is most likely the MD switch in the bottom of the camera is
either dirty or out of adjustment. The switch does not need
modification to work with a winder.
John
Kinkead, Frank W wrote:
>
> I have two OM-10s; one works fine with my Winder 1 and one (a newer OM-10
> Quartz) does not. I recall seeing something on a FAQ about a making a small
> electrical wiring modification under the baseplate of OM-10s that might fix
> same. I can't recal where I saw this. Has anyone else ran across this
> reference ? Has anybody tried to accomplish the mod ?
>
> Chip
> (St. Louis, MO USA)
>
> < This message was delivered via the Olympus Mailing List >
> < For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
> < Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|