The position of the MD switch in the camera bottom is critical. The
grounding switch must close when the mirror is at a certain position,
likewise with the other switch.
John
Camtech
Morgan Sparks wrote:
> Does anyone have a solution--short of a general overhaul--to my problem:
>
> My OM2S, which doesn't suffer from any of the bugs hashed out in this
> forum, will not function properly with the Winder 2. Basically when you
> trip the shutter the camera will make an exposure, but not advance the
> film. A subsequent push on the shutter release will then advance the
> film. This happens about half the time; otherwise the winder will go
> through its full cycle.
>
> All the contacts are clean, and this problem occurs using different
> winders. I tried searching this problem, and couldn't find it
> specifically, although I found enough others to consider myself
> otherwise pretty lucky.....
>
> Fuel price/Suburban content: None, but at least the subject brought me
> in from lurking.
>
> Morgan Sparks
>
> <
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|