If the name ring has 2 notches on the outer edge, you may be able to unscrew it
with fine tweezers. Underneath you should find a loose retaining ring.
Tightening this should eliminate the loose element problem.
John
Greg Heier wrote:
> I have a lens that's developed some slight travel in its front element
> (about 1/64th of an inch or so). :(
>
> Not quite sure when/how this started, but it may have been after it was in
> the car for a while on a hot day. Any ideas on what I can do to fix this? Is
> something maybe loose and just need to be tightened or is this a major
> repair (this lens is a 100 f/2.8).
>
> Greg
>
> < This message was delivered via the Olympus Mailing List >
> < For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
> < Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|