Olympus-OM
[Top] [All Lists]

Re: [OM] Nathan's PAD 22/3/2010: Leica at the Chandos

Subject: Re: [OM] Nathan's PAD 22/3/2010: Leica at the Chandos
From: Chuck Norcutt <chucknorcutt@xxxxxxxxxxxxxxxx>
Date: Tue, 23 Mar 2010 13:25:53 -0400
That much I did know but knew nothing about trimming post-60s film leaders.

Chuck Norcutt


Jim Nichols wrote:
> Chuck,
> 
> With screw-mount Leicas, the back does not open.  The film must be loaded 
> from the bottom by slipping the end of the leader under a clip on the takeup 
> spool, and then pushing the film cartridge and takeup spool into place, 
> carefully. After the bottom plate is replaced, one should advance one frame, 
> take up the slack with the rewind knob, then advance two more frames, 
> watching to see that the rewind knob is turning.  This indicates that the 
> film is properly loaded and advancing.  After that, set the counter to 1, 
> and everything is ready to go.
> 
> Jim Nichols
> Tullahoma, TN USA
> ----- Original Message ----- 
> From: "Chuck Norcutt" <chucknorcutt@xxxxxxxxxxxxxxxx>
> To: "Olympus Camera Discussion" <olympus@xxxxxxxxxxxxxxxxx>
> Sent: Tuesday, March 23, 2010 11:19 AM
> Subject: Re: [OM] Nathan's PAD 22/3/2010: Leica at the Chandos
> 
> 
>> No, that wasn't in jest at all.  The only screw mount Leica I've ever
>> seen in person was owned by a friend of mine in the early 60s.  You've
>> just told me why I never saw him trim any film.  :-)
>>
>> Chuck Norcutt
>>
>>
>> Jim Nichols wrote:
>>> Hi Chuck,
>>>
>>> Is that in jest?  For screw-mount Leicas, the recommended procedure, with
>>> modern film loads, is to trim the film to the shape of the long leader 
>>> that
>>> was originally used by Kodak and others in the 40s, 50s, and 60s.  Many
>>> ignore this, but I, for one, feel it is the safest way to avoid loading
>>> problems.
>>>
>>> Jim Nichols
>>> Tullahoma, TN USA
>>> ----- Original Message ----- 
>>> From: "Chuck Norcutt" <chucknorcutt@xxxxxxxxxxxxxxxx>
>>> To: "Olympus Camera Discussion" <olympus@xxxxxxxxxxxxxxxxx>
>>> Sent: Tuesday, March 23, 2010 6:13 AM
>>> Subject: Re: [OM] Nathan's PAD 22/3/2010: Leica at the Chandos
>>>
>>>
>>>> What film trimming ritual?
>>>>
>>>> Chuck Norcutt
>>>>
>>>>
>>>> Nathan Wajsman wrote:
>>>>> I am on a brief visit to London. Last night I was enjoying some
>>>>> pints, and my enjoyment became even higher when I saw this:
>>>>>
>>>>> http://www.greatpix.eu/Other/Picture-A-Day/4253606_netUM#817390767_EztSA-O-LB
>>>>>
>>>>>
>>>>> The guy was actually using his camera and demonstrated its operation
>>>>> to his table companions, including the film trimming ritual.
>>>>>
>>>>> Nathan
>>>>>
>>>> -- 
>>>> _________________________________________________________________
>>>> Options: http://lists.thomasclausen.net/mailman/listinfo/olympus
>>>> Archives: http://lists.thomasclausen.net/mailman/private/olympus/
>>>> Themed Olympus Photo Exhibition: http://www.tope.nl/
>>>>
>>>>
>>>
>> -- 
>> _________________________________________________________________
>> Options: http://lists.thomasclausen.net/mailman/listinfo/olympus
>> Archives: http://lists.thomasclausen.net/mailman/private/olympus/
>> Themed Olympus Photo Exhibition: http://www.tope.nl/
>>
>>
> 
> 
-- 
_________________________________________________________________
Options: http://lists.thomasclausen.net/mailman/listinfo/olympus
Archives: http://lists.thomasclausen.net/mailman/private/olympus/
Themed Olympus Photo Exhibition: http://www.tope.nl/

<Prev in Thread] Current Thread [Next in Thread>
Sponsored by Tako
Impressum | Datenschutz