You can connect battery (nicad /nimh ) packs to motor with "Relay Cord"
of which I have new in stock.
___________________________________
John Hermanson | CPS, Inc.
21 South Ln., Huntington NY 11743
631-424-2121 | www.zuiko.com
Olympus OM Service since 1977
Gallery: www.zuiko.com/album/index.html
Don Holbrook wrote:
> Both the MD1 & 2 will clear, but the #1 is cheaper and easier to
> find. The battery packs, however, will not clear and need to be
> connected with one of the 2 available cables. The connection will
> also clear, being off-center. There are 2 battery packs -- control
> pack 1 or 2 -- which are interchangeable but often need rebuilt due
> to battery age. John H can do this.
>
> ----- Original Message -----
>
> From: Bart Wientjes
>
> To: Olympus Camera Discussion
>
> Sent: Fri, 28 Aug 2009 14:39:01 +0000 (UTC)
>
> Subject: Re: [OM] One Small Complaint (Bellows + Winder)
>
>
>
> Dawid,
>
>
>
> I haven't got my gear handy to give it a go, but you can check the
>
> image in
> http://olympus.dementia.org/eSIF/om-sif/motordrivegroup/motor_drive_1.htm
>
>
> to get an idea.
>
> The thickness of the base part of the MD1 is identical to that of a
>
> Winder, so my guess is it would fit over the rails.
>
> Now, for powering the MD, you'd need to connect a Relay Cord to the
>
> connector that is clearly visible in the right picture of the MD. You
>
>
> need to verify visually if that leaves enough room for the bellows
>
> rails.
>
>
>
> Cheers,
>
> Bart
>
>
>
>
>
>> Back to the bellows: Mounting upside-down is not really an option
>> for
>
>> me because of flash,
>
>> but are you guys saying that a Motor Drive 1 would fit? (whereas
>> the
>
>> winder does not?)
>
--
_________________________________________________________________
Options: http://lists.thomasclausen.net/mailman/listinfo/olympus
Archives: http://lists.thomasclausen.net/mailman/private/olympus/
Themed Olympus Photo Exhibition: http://www.tope.nl/
|