There were 2-3 different circuits before the 4T circuit.
----------------------------------------------------
John Hermanson www.zuiko.com
mail: omtech@xxxxxxxxx
Camtech Photo Services, Inc.
21 South Lane, Huntington NY 11743-4714
631-424-2121
------------------------------------------------
----- Original Message -----
From: "Gordon J. Ross" <gordross@xxxxxxx>
To: <olympus@xxxxxxxxxx>
Sent: Thursday, April 29, 2004 2:20 AM
Subject: [OM] Re: OM-4
>
> Hi Moose:
>
> Never having used a 2, that is a new fact for me. The other issue that was
> raised about the 4 battery drain, on the earlier models (I'm very glad I
> complained about mine back then, as they replaced the circuit under
> warranty) is it not the same case with the 2S draining batteries?
>
> Gord
> ----- Original Message -----
> From: "Moose" <olymoose@xxxxxxxxxxxx>
> > There were a lot of replies to this, but they missed one practical
> > difference which can be significant in use. The 2S spot meter is
> > continuous and operates in Manual Mode only. The 4(T(i)) spot meter is
> > 'on-demand' and works in both Auto and Manual. Where you can point the
> > 2S at various spots, mentally decide on and set an exposure, with the 4,
> > you see the average reading until you push the spot button, then you can
> > see both the fixed spot reading and the average reading. Further pushes
> > of the spot button (up to 8) are averaged into the spot setting. If you
> > want to test spot readings of various parts of the scene, you have to
> > press Spot and then clear the reading for each one. They are different
> > ways of working and some like one more than the other.
> >
> > Since almost all of my shots are taken in Auto, the spot meter on the 2S
> > is of no use to me. So I have 1(n), 2(n), 4 and OMPC bodies for use.
> > The ESP metering of the OMPC is by far the best non-spot metering in any
> > OM. My most used bodies are 4 and PC.
> >
> > Moose
>
>
> The olympus mailinglist olympus@xxxxxxxxxx
> To unsubscribe: mailto:olympus-request@xxxxxxxxxx?subject=unsubscribe
>
> To contact the list admins:
mailto:olympusadmin@xxxxxxxxxx?subject="Olympus List Problem"
>
>
The olympus mailinglist olympus@xxxxxxxxxx
To unsubscribe: mailto:olympus-request@xxxxxxxxxx?subject=unsubscribe
To contact the list admins: mailto:olympusadmin@xxxxxxxxxx?subject="Olympus
List Problem"
|