----- Original Message -----
From: "John A. Lind" <jlind@xxxxxxxxxxxx>
To: <olympus@xxxxxxxxxxxxxxx>
Sent: Tuesday, 02 September, 2003 05:03 AM
Subject: [OM] A "Fang" . . . Sort Of
snip
>
> I do have one question if someone has used one of these things before.
The
> dryfit appears to charge properly and the flash operates
> flawlessly. However, the dryfit battery is not new; it's about four years
> old. When plugged into the flash handle and turned on after a full
> charging cycle, the red light on top of the battery slab box next to the
> power switch blinks. Is this "normal" operation, or is indicative of
> something else?
That blinking is normal. When the battery is switched on the blinking light
is a signal that the flash is ready to operate. Section 4.6 on page 14 of
the 60 CT-4 instruction booklet refers. The blinking goes out when the
battery is switched off or expires through lack of a charge.
jh
>
> Thanks,
> -- John
>
>
> < This message was delivered via the Olympus Mailing List >
> < For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
> < Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
>
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|