Collar is stamped in at the factory. If you take the collar off, rewind
button may fall out along with the spring and pin. Also dirt / moisture
will get in. A special tool KC0217 is used on the inside to "fix" the
collar to the top.
----------------------------------------------------
John Hermanson www.zuiko.com
mail: omtech@xxxxxxxxx
Camtech, Olympus Sales & Service since 1977
21 South Lane, Huntington NY 11743-4714
631-424-2121
----------------------------------------------------
----- Original Message -----
From: "Piers Hemy" <piers@xxxxxxxxxx>
To: <olympus@xxxxxxxxxxxxxxx>
Sent: Tuesday, July 29, 2003 3:34 PM
Subject: [OM] OM-4T disassembly question
> Any ideas how the black collar surrounding the rewind button is fixed to
the
> top plate on an OM-4T?
>
> Or, more to the point, how it can be UNfixed from the top plate?
>
> Piers
>
>
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|