Walt,
OK, I haven't done this, butttttttt......
You are using a T ring adapter to mate the camera and lens?
Cannibalizing the back ring from an extension tube or cheap 2X,
you want the little doo-hicky that the release engages on the lens
to be in contact with the lever. So much for the technical terms,
but a minute of looking at a standard OM lens and the camera will
reveal which part of the tube you need.
I went the other way, in that I made an adapter to mate OM lenses
to digital cameras, and wanted to be able to set the aperture.
Tom
Tucson, AZ
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|