Try it back to back with an OM1 with MLU. The difference is quite evident, as
is substituting the grip for the pack.
Or do I need my motors CLAd?
Julian
> from: "C.H.Ling" <chling@xxxxxxxxxxxxx>
> date: Wed, 30 Apr 2003 08:38:16
> to: olympus@xxxxxxxxxxxxxxx
> subject: Re: [OM] This is the first time I have posted questions...
>
> julian_davies@xxxxxxxxxxxxxx wrote:
> >
>
> >
> > 40s take the full - monty motor, but only do 3.5 FPS because of the time
> > required by program mode operation (same as the OM2S)
> > Later 10s take the motor without self - destructing if you do a little
> > surgery on the diode. late 10s, 20s and 30s do full speed with the motor
> > drive.
> > Apart from the OM1 with MLU, none of the bodies do the full 5FPS claimed in
> > the later literature with MD1. The early literature made it clear that 4FPS
> > was all you could expect without MLU. To get the 5, you need more voltage
> > than the standard control pack provides, also (control grip with alkalines
> > or mains power)
> >
>
> No, as far as I know a good Ni-cd pack can provide 5fps with OM2n/OM4
> at 1/250s or above, no MUL needed.
>
> C.H.Ling
>
> ________________________________________________________________________
> This email has been scanned for all viruses by the MessageLabs SkyScan
> service. For more information on a proactive anti-virus service working
> around the clock, around the globe, visit http://www.messagelabs.com
> ________________________________________________________________________
>
> < This message was delivered via the Olympus Mailing List >
> < For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
> < Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
>
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|