How about a silicon based dry lubricant?
----- Original Message -----
From: "Roger D. Key" <rdk@xxxxxxxxxx>
To: <olympus@xxxxxxxxxxxxxxx>
Sent: Thursday, March 27, 2003 4:38 AM
Subject: Re: [OM] How to hot shoe supports back on?
>
> The mount face on the camera is stainless steel; the lens mounts I would
> guess are chromed brass, but I could be wrong.
>
> Regards/Mvh.,
> Roger Key
>
>
>
> Brian Swale wrote:
>
> The mounts are not stainless steel as far as I know. Stainless steel has
> one
> great property in that it work-hardens. In other words, rub it, and the
> rubbed
> surface gets harder. But it is quite difficult to machine stainless steel.
>
> Brian
>
>
>
>
>
>
> < This message was delivered via the Olympus Mailing List >
> < For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
> < Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
>
>
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|