When I find the bits and money I intent to run multiple T32s / T20s linked
using one cable from the camera to multiconnector(s) using TTL-Auto (the
idea of calculating it all sounds horrid).
Firing off hotshoe and bounce grip is a temporary experiment so I can play
with the existing kit - after all why collect OM gear and not play :-)
thanks
-----Original Message-----
From: owner-olympus@xxxxxxxxxxxxxxx
[mailto:owner-olympus@xxxxxxxxxxxxxxx]On Behalf Of John A. Lind
Sent: 26 September 2002 03:02
To: olympus@xxxxxxxxxxxxxxx
Subject: Re: [OM] Firing 2 flash guns
At 19:53 9/25/02, I wrote:
>Works just fine in both Normal Auto and TTL Auto.
I should caveat this by stating in Normal Auto the flash units need to be
at the camera location (on a flash bracket, BG-2, in hot shoe, etc.) and
cannot be remoted in a different location or allowed to illuminate any of
the other flash head sensors. It's easier to use TTL-Auto if possible.
-- John
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|