Hi Tom et al
Here's your answer
> J. Lind also wrote:
> "Don't keep us in suspense! What was the solution to the shift creep."
>
> Hold the lens so that you are looking at the rear element (rear cap on is
> fine). Shift the lens up to expose the felt light seal. Look closely for a
> small hole with a flat-head screw recessed in it. Tighten this screw as
> needed.
> FWIW, it only took a very small turn to fix the problem.
>
> - --p.j.
HTH; Brian Swale
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|