Thanks Mike, but what is "photo-flow" solution? Is this your name
for the developer solution?
I don't share your optimism (nor your desire :>)) for a digital OM.
All the problems that digital cameras pose rather overcome my natural
"gadget-freak" desires. All in all, I tend to want to stay with the
current system slow and imperfect as it is.
Chris
At 21:59 -0500 5/2/02, mcd3@xxxxxxxxxxxxxx wrote:
Chris,
I have found that it is ESSENTIAL to mix photo-flow solution using
distilled water. As soos as I started to do this, all my problems
with pinpoint white dots on my negatives/prints went away. I also
tend to use slightly less of the Photo-flo concentrate than
recommended. I usually don't even have to wipe my negatives after I
hang them. It also helps if you don't stir up a lot of dust in the
area where your are going to hang the wet negatives. I have rarely
seen problems with "air bells", air bubbles stuck to the film during
processing, but make sure that you use a pre-wet of water prior to
developer, and don't forget to rap the tank as everyone suggested,
it's good advice.
snip
I prayed for a digital OM body, and I still do, but I think that we
shall be unanswered in the near future.
Mike
(please let me be wrong)!
--
<|_:-)_|>
C M I Barker
Cambridgeshire, England.
+44 (0)7092 251126
mailto:imagopus@xxxxxxxxxxxxxxxx
... a nascent photo library.
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|