In auto mode or program mode, my OMPC fires the t20 at full power
regardless of lighting, and the shutter stays open for several seconds.
Sometimes it has to be reset by removing the batteries and reinstalling
before the shuter closes, and /or the mirror will return. (100 asa print
film in camera, film speed set manually) In manual mode it fires the t20
and the shutter sounds right for 1/60. It sounds to be firing quite
normal in auto or program at speeds of 1/60 or more when used without
flash. Batteries check okay with the battery check. Using ms76 silver
duracell. Is this the dreaded dead circuitry common to PC's? Wayne
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|