Actually, the difference is that the Winder 1 does not have a sequence setting
on the switch. If you connect together the frame of the camera and the outside
of the remote jack, a winder 1 will fire continuously.
"Timpe, Jim" wrote:
>
> I believe that is correct.
>
> -----Original Message-----
> From: John Hudson [mailto:jahudson@xxxxxxx]
> Sent: Monday, December 03, 2001 7:06 AM
> To: LIST - Olympus
> Subject: [OM] Olympus OM winders
>
> Is the only difference between an OM Winder 1 and an OM Winder 2 that
> the 1 will only fire single exposures whereas the 2 will fire single and
> sequence exposures?
>
> John Hudson
>
> < This message was delivered via the Olympus Mailing List >
> < For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
> < Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
>
> < This message was delivered via the Olympus Mailing List >
> < For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
> < Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|