----- Original Message -----
From: "Bernd Moeller" <dsl33687a@xxxxxxxxxxxxxxxxx>
>
> Reading the manual for the MD1, you find that film winding speed goes down
with the voltage drop caused by e.g. the 10m relay cord. So, the 5 frames
per second must be at 18V, while lower voltages like 15V will get the speed
down to something like 4 fps.
>
Don't know about the combination of 10m relay cord, the original Ni-cd pack
can give 5fps and also the 18V control grip. Both my Ni-cd pack were changed
and installed with the 9V cells (13pcs), they can only delivery 4.2fps.
C.H.Ling
> With the relay cords you can also use a 12V car battery by plugging the DC
source into small tab holes on the relay cord adaptor.
>
> Best regards
>
> Bernd Möller
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|