CLinton:
Does the lens hood on the 200 mm f/5 also just unscrew? I would like to
take the hood off of the lens and re-paint it, but I didn't want to
"reef" on it.
Thanks!
Bill Stanke
clintonr@xxxxxxxxxxxxxxxx wrote:
>
> Order part #CB080400 from Olympus/Parts. It's still available (we use it to
> fix a light leak on the Stylus Zoom).
>
> The hood just unscrews -- hold the knurled part at the back of the hood, and
> unscrew the hood from it. The felt goes inside the knurled ring, though, I
> believe -- to get it off, you'll have to remove the brass stop screw(s) in
> front of it.
>
> Mike wrote:
>
> > Any way to tighten the integral hood on a lens? Specifically the 85-250.
> > There is no friction so it just flops. otherwise the lens works fine. Is
> > there a way to remove the hood and restore the felt or whatever gives
> > enough friction to work properly?
> >
> > Thanks, Mike
> >
> > --
> > Latitude 48° 32' North, Longitude 123° 7' West
> >
> > < This message was delivered via the Olympus Mailing List >
> > < For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
> > < Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
>
> < This message was delivered via the Olympus Mailing List >
> < For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
> < Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|