The integral hood just unthreads. One can then replace the felt. The trick
is finding appropriate thickness felt. Microtools might have some.
Jim Couch
Mike wrote:
> Any way to tighten the integral hood on a lens? Specifically the 85-250.
> There is no friction so it just flops. otherwise the lens works fine. Is
> there a way to remove the hood and restore the felt or whatever gives
> enough friction to work properly?
>
> Thanks, Mike
>
> --
> Latitude 48° 32' North, Longitude 123° 7' West
>
> < This message was delivered via the Olympus Mailing List >
> < For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
> < Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
--
Jim Couch
Tacoma, WA USA
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|