> I think you are referring to the PC synchro socket. It is used with a
> manual (non-TTL) electronic flash unit. The Bounce Grip 2 has a cable
> built-in that would plug into this connector. TTL flash
> would require a
> cable from the TTL socket on the body to the TTL socket on the Grip.
Okay, and the TTL socket is the one with the five pins in just below the
rewind/open back dial on the left of the camera (right when seen from the
front). That makes sense -- thanks for the answer.
-- dan
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|