Is it normal for the OM3 LCD to react as follows :
1)Off in the B mode
2)When you select a shutter speed after the B mode, you need to press the
shutter release to re-activte the LCD.
3)the flash ready uses power from the flash and not from the camera.
4)it disappears in a split second each time the shutter is released whereas
the LCD of the OM-4-Ti will remain stable.
TIA
Cheers
Jim Teo
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|