I just put the battery in there -- no spacers or anything. Never, ever,
had a problem w/connections. And use any type "76" battery marked
"silver oxide/1.5 volts".
Chip Stratton wrote:
>
> Alan -
>
> I just use some rubber washers I found at the hardware store with a 5/8"
> inside diameter and 7/8" outside diameter. Fits on the 357 cell and
> everything stays snug inside the battery compartment.
>
> The outside diameter of the cell is .45" (11.4mm), and the inside diameter
> of the battery compartment is .62" (15.7mm), so there isn't much space.
>
> Chip Stratton
> cstrat@xxxxxxxxx
>
> >
> > I have an om-1 that has been modified internally to take 1.5v batteries.
> > I'm currently using a 625a which is pretty close but would like to switch
> > to a silver oxide. Question is what size silver oxide gives 1.5v and fits
> > in the battery chamber ?
> >
> > Alan
> >
> >
>
> < This message was delivered via the Olympus Mailing List >
> < For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
> < Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|