Ref. COKIN series 'A' & 'P' Filter Holders.
Dear OLYMPUS friends,
with ref. to the recent discussion of using COKIN Series 'A' & 'P' Filter
holders and Filters with wide-angle zuiko lenses.
The advise given by one of the readers was to cut the 'filter-holding arms and
then use the filter in the holder such that the arm does not intrude into the
lens view.
Let us begin by analysining the COKIN FILTER HOLDER.
The FIRST pocket is for the 'metal thread adapter'.
The second is for the Filter Cap.
The third,fourth and fifth pocket/arms are for the FITLERS.
Now if you normally assemble the COKIN as advised the arms will INTERFERE in
lenses as wide as 24mm/84* wide lenses.
Solution is to hold the 'metal thread adapter' in the fourth pocket/arm,
thread the lens through the COKIN FILTER HOLDER and slide the FILTER REQUIRED in
the fifth and final pocket.
Result 'NO INTERFERENCE' in the angle of view.
I have found this successful with both A & P series COKIN HOLDERS.
Try this method, it is much simpler than major surgery of the COKIN HOLDER.
Regards. Sunil Manga.
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|