-----Original Message-----
From: Hans van Veluwen <mail@xxxxxxxxxxxxxxxx>
To: olympus@xxxxxxxxxxxxxxx <olympus@xxxxxxxxxxxxxxx>
Date: Monday, October 18, 1999 7:33 PM
Subject: Re: [OM] om-4 disaster?
>: Now here is where it gets weird. After removing the flash I found that
>: the otf metering would no longer work. In auto mode the shutter doesn't
>: sync up to the indicated reading on the lcd. If you were to spot meter
>: in auto then the shutter does sync at the indicated time but, if for
>: example the sutter speed is very slow, the shutter will not release when
>: the camera is pointed into direct light or if the apperature is opened
>: right up.
>
>Auto OTF only works properly when there is a film loaded.
>
>H@nz
>
>
Put in the demonstration grey card at the film pressure plate. Its an 18%
grey card. That way , readings will be accurate as if film is inside.
TMLee
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|