Olympus-OM
[Top] [All Lists]

Re: [OM] M-Quartz remote controller 1

Subject: Re: [OM] M-Quartz remote controller 1
From: Neil Izzard <shooter@xxxxxxxxxxxxxxxxxxx>
Date: Fri, 20 Aug 1999 01:22:50 +1000
    Hey Wayne, I just priced one from R Gunz & Co. Olympus agents here in
Melb.
Are you sitting down? New they are something like Aud. $400.00 - 450.00 !
Sorry for the bad news. But a simple fix if it suits your purpose, is make up
a simple cable remote for your Motor Drive/Winder.
You will require a 2.5mm Mono Jack, this plugs into the socket on the drive. A
suitable length of  two core cable (round is better than figure 8, easier to
roll) and a single pole, momentary on, normally open switch.
    Fit the switch into a suitable handle, I  used an old AAA mini light torch
body, but anything around that size will do, a bit of soldering and you have
your remote for about $ 10.00

"Harridge, Wayne" wrote:

> Dear Zuiks,
>
> Does anyone know what the above mentioned device is worth ?  I have a
> possible chance to purchase one from a private buyer and am wondering what
> to offer.
>
> Wayne Harridge
> Ivanhoe, Victoria, Australia
> http://www.geocities.com/Paris/Louvre/6152/
>
> < This message was delivered via the Olympus Mailing List >
> < For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
> < Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >


< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >


<Prev in Thread] Current Thread [Next in Thread>
Sponsored by Tako
Impressum | Datenschutz