Do you mean you take the flash out of TTL and set to the f16 setting for
regular auto flash? If so, you may be getting the correct exposure, but
it is not a TTL exposure.
John
Terry and Tracey wrote:
>
> I set my T32 to 16 when using TTL auto for close shots.
>
> Foxy
>
> >> However,one issue not yet mentioned by all the resposes to this
> >> thread
> >> is that if you are not careful you can easily exceed the
> >> ability of the
> >> camera to cut off
> >> the flash soon enough, yielding over exposures. Higher power
> >> flashes are
> >> usually worse
> >> in this respect!
> >>
> >
> >The specs for the Oly flash units specify both maximum and minimum working
> >distances, see for example
> >http://www.veluwen.demon.nl/om-sif/flashphotogroup/t20.htm
> >
> >I have done a little testing with a T20 and over exposure is definitely a
> >problem when you get closer than the minimum distance.
>
> < This message was delivered via the Olympus Mailing List >
> < For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
> < Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|