Kenneth:
"Stressing" Monopods:
It was once demonstrated to me that to stabilize the monopod (which I use
fairly frequently) think of it as the 3rd leg of the tripod and you are
(presumably) providing the other two. Therefor, the monopod should best be
placed *at an angle* away from yourself while you lean slightly into it. I
use this technique when I can and find that it is much more stable.
"The ball-end"
I use the Bogen monopod and the 3265 pistol grip w/quick release plates.
With this I can flop the unit on its side and shoot verticals. Not *nearly*
as stable as horizontals, but do-able and quick. Because the 3265 has 360
degree angulation, it has the added advantage of when shooting horizontals
of allowing the off-angle stabilization technique (as above) to be done very
quickly and easily.
Next, if I don't have to move around too much but need the small form factor
of a mono vs. tripod, I add two (one for each shoulder) Bogen screw-on
shoulder attachments under the 3265. Now I've got a 3-point (my hands/head
and shoulders) stabilization both on the ground and on myself. Very slow
shutter speeds are a breeze. It's a little awkward at first, you have to
adjust each shoulder piece to fit your body, but after that it's a
no-brainer. If you have to quickly move around a lot, i.e., moving sports
shots, I don't recommend it. I've done 1 second exposures at dusk and they
are _very_ acceptable.
Lastly, I like using a monopod because I can slap on a 24mm, focus to
infinity and stop it down for DOF, put the Oly on self timer, and hoist the
_very light_ combo 5' over my head for some interesting aerial views.
Wonderful in crowd situations like marathons, rodeos etc. I don't block
anyone's view and get shots few others do. (No way am I going to stick an
F5, with all that mass, up in the air... waaay too heavy).
Best,
Tim
> -----Original Message-----
> From: owner-olympus@xxxxxxxxxxxxxxx
> [mailto:owner-olympus@xxxxxxxxxxxxxxx]On Behalf Of Kenneth Sloan
> Sent: Sunday, May 02, 1999 8:50 PM
> To: olympus@xxxxxxxxxxxxxxx
> Subject: Re: [OM] Monopod & ball head
>
>
> > the need to adjust vertical on the monopod itself. All you
> need is up and
> > down movement. Thus, the Manfrotto 3232 (or it's quick
> release cousin) works
> > best in this application (and at half the price ;)).
>
> I started this...and am grateful for the useful pointers. From what I
> have gathered, the Bogen #3232 is the same as the Manfrotto #234. This
> sounds like exactly what I asked for. My old friends at Glazers in
> sunny Seattle have one in stock for under $20. I'm left with two
> questions:
>
> *I"m told that I'll need a 3/8 <-> 1/4 convertor to attach my
> Velbron stick to the Bogen 3232 - is it reasonable to assume that
> any local camera shop should be able to supply this?
>
> *now that I hear about a "quick-release cousin", I'm forced to ask:
> what's it cost, where can I find one, does it matter?
>
> I'm usually shooting a Tokina mirror 500 f/8, or a Zuiko 200 f/5, or (in
> extreme low light situations) just about anything - I've been known to
> use my trusty 24 f/2.8 on the monopod.
>
> I like to slightly "stress" the setup for each shot, to the point of
> slightly (I said slightly!) bending the monopod. In these cases, the
> direct connection of camera to monopod stud is ideal. Any contraption
> that I add (either a small ball-head, or the Bogen 3232 flip-flop) must
> be able to stand up to this abuse.
>
> Perhaps I should just learn to love horizontal compositions?
>
> --
> Kenneth Sloan sloan@xxxxxxx
> Computer and Information Sciences (205) 934-2213
> University of Alabama at Birmingham FAX (205) 934-5473
> Birmingham, AL 35294-1170 http://www.cis.uab.edu/info/faculty/sloan/
>
> < This message was delivered via the Olympus Mailing List >
> < For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
> < Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
>
>
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|