The manual position (even without turning the panel over) is the OTF
(TTL) position.
John
Charles Loeven wrote:
>
> Hi Joel,
>
> <<Oly Shooters:
>
> >I just picked up a T20 -- sans documentation, of course.
>
> >Did we ever get a site up with such documentation?
>
> >In the meantime, one quick question: As one looks at the back of the
> >flash, there is a slider for the Manual setting and stops for two Auto
> >settings. I'm guessing that the left Auto setting is for flash-controlled
> >auto discharge, and that the right Auto setting is for TTL. Trouble is, I
> >see no sensor for flash-controlled auto discharge.>>
>
> Manual is a full dump.
> the 2 auto settings are the 2 working fstops in regular (computer) auto.
> To use it TTL turn the panel over. Good at any f stop (within range).
> Press in the little button on the lower right next to the slider.
> This will release the slide and let you slide it out.
> turn it over and slide it in. Now it will work on full auto TTL with
> any OM 2 or 4.
>
> Opinion: This is the coolest little flash I have ever seen.
>
> BTW: The panels come marked in feet or meters.
> You have one or the other. check before calculating distance and f stop.
>
> Charlie L.
>
> < This message was delivered via the Olympus Mailing List >
> < For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
> < Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|