In article , *- DORIS FANG -* <sfsttj@xxxxxxxxxxxxxxxxxxx> writes
>On Fri, 4 Dec 1998, Peter Jones wrote:
>
>> I have a slight problem with a recently acquired Olympus XA2. The leaver
>> that changes the focus range was stuck so I removed the baseplate, had a
>> fiddle about and fixed the problem. Alas, now when activating the flash
>> switch on the camera the flash switches on OK, but the camera meter
>> still wants to set the aperture and shutter speed instead of the default
>> settings for flash exposure. It seemed to be working OK before I removed
>> the baseplate.> Any XA experts about?
>
> No expert here...but is your flash set to the 100/400 settings, or
>"full" ?
>
> *= Doris Fang =*
> [Happy owner of two XA2's]
>
I've tried all three flash settings, though I suspect switching the
flash on via the camera should set f\4 regardless of what power level
the flash is set to.
Peter
--
Peter Jones peter@xxxxxxxxxxxxxxxxxxx
London NW6
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|