On 4 Oct 98, at 23:41, ONLYOLYBW@xxxxxxx wrote:
> Hi Les & George,
> The 280 flash will work in "TTL Normal" & Manual modes on the Bounce Grip 2 if
> you plug in the 5 pin TTL cord into the bottom of the bounce grip.
> The Super FP mode ONLY works on the bounce grip if you connect the 7 pin F0.6
> TTL cord from the hot shoe directly to the 280 flash. Of course, you also
> have Normal TTL and Manual capabilities with this hook up.
> What I do fine strange with the 280 on the bounce grip is; if there are no
> batteries in the 280 flash, it will not fire, nor will it charge up. This is
> not the case with the T32.
I've never seen either flash in the flesh, but I recall hearing that the F280
uses
a different voltage, and thus does not have the 3 pin high voltage connector
like the T-32. I've seen pics which appear to show the socket, but the pins
are missing on the F280.
> BW
> Ps. Many Thanks Shawn!!!
No problem...
Shawn & Janis Wright
swright@xxxxxxxxx
http://Zuiko.sls.bc.ca/~swright
(Olympus List Archives)
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|