On Sun, 4 Oct 1998 23:41:22 EDT, ONLYOLYBW@xxxxxxx wrote:
>Hi Les & George,
>The 280 flash will work in "TTL Normal" & Manual modes on the Bounce Grip 2 if
>you plug in the 5 pin TTL cord into the bottom of the bounce grip.
>The Super FP mode ONLY works on the bounce grip if you connect the 7 pin F0.6
>TTL cord from the hot shoe directly to the 280 flash. Of course, you also
>have Normal TTL and Manual capabilities with this hook up.
>What I do fine strange with the 280 on the bounce grip is; if there are no
>batteries in the 280 flash, it will not fire, nor will it charge up. This is
>not the case with the T32.
>BW
>Ps. Many Thanks Shawn!!!
In the same spot where the T-32 has a 3-fold connector to the bounce
grip, the F-280 has only an empty hole. So there is no possibility to
get the bounce grip high voltage into the F-280.
Frank van Lindert
Utrecht NL.
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|