Olympus-OM
[Top] [All Lists]

Re: [OM] The Impossible OM Project

Subject: Re: [OM] The Impossible OM Project
From: Mark Kronquist <mak@xxxxxxxxxxxx>
Date: Sun, 7 Sep 2014 09:03:31 -0700
Mike Knight (Kight Camera repair and I are working on the concept. eFilms 
patents have, I believe, just lapsed...Kickstarter anyone? Need 12-20MP APS-C 
sensors and package....Mike can do the mechanical work of taking OM-1 OM-3 
backs and making them receiptive...ditto for Nikon FM FM2 2n 2T.  Metering 
MIGHT be a problem for OM2/n reading off curtain
On Sep 7, 2014, at 8:37 AM, Ken Norton wrote:

> Sooooo, Let's talk this through a little bit to see if there is
> anything to this. The digital back to rangerfinder project proves that
> this might be possible.
> 
> Just thinking out loud here, but here are several things to think about.
> 
> 1. The OM bodies have electrical contacts for interfacing with motor
> drives, flashes and data backs.
> 
> 2. The OM bodies can be electrically triggered via the motor drives.
> 
> 3. The OM bodies can electrically trigger the data backs.
> 
> 4. Therefore, the ability to interface a non-OM component to an OM
> body can be done with zero surgery to the OM body.
> 
> 5. The shutter-speed of the exposure can be controlled one of two
> ways. Either the camera is set to a long shutter speed and the digital
> back to a shorter speed, or the digital back can be set to a long
> shutter speed and the camera's curtain governs the actual exposure.
> 
> 6. Using this rangefinder project as an example, the guts of the
> digital camera can be stuffed into the film chambers as well as the
> custom back itself.
> 
> 7. I really like what I'm seeing here and I think that it's closer
> than it has ever been before. I like the idea of using the low-end
> SONY in this case, because it's almost entirely touch screen control,
> so we don't have to build a control interface with ten zillion buttons
> and twisty controls.
> 
> 8. The 3D printing with higher-quality materials makes it repeatable
> and manufacturable.
> 
> 9. What would this be worth to me? I could easily justify a cost of
> $1200 for this to have an APS-C back for my OM bodies.
> 
> -- 
> Ken Norton
> ken@xxxxxxxxxxx
> http://www.zone-10.com
> -- 
> _________________________________________________________________
> Options: http://lists.thomasclausen.net/mailman/listinfo/olympus
> Archives: http://lists.thomasclausen.net/mailman/private/olympus/
> Themed Olympus Photo Exhibition: http://www.tope.nl/
> 

-- 
_________________________________________________________________
Options: http://lists.thomasclausen.net/mailman/listinfo/olympus
Archives: http://lists.thomasclausen.net/mailman/private/olympus/
Themed Olympus Photo Exhibition: http://www.tope.nl/

<Prev in Thread] Current Thread [Next in Thread>
Sponsored by Tako
Impressum | Datenschutz