Ken,
I found the Wrench 1 settings, but don't understand all of the configuration
shorthand.
S-AFAEL/AFL has Modes 1-5 available, but I can't make out an On or Off, just
a bunch of shorthand selections. Which Mode do you use for manual lenses?
C-AFAEL/AFL has Modes 6-7. Same question. Which do you set for use with
manual lenses?
Jim Nichols
Tullahoma, TN USA
----- Original Message -----
From: "Ken Norton" <ken@xxxxxxxxxxx>
To: "Olympus Camera Discussion" <olympus@xxxxxxxxxxxxxxxxx>
Sent: Friday, November 16, 2012 12:31 PM
Subject: Re: [OM] E-1 preventative maintenance
>> I have only one issue with my E-1. From time to time, when I press the
>> shutter release, nothing happens. Usually, if I raise my finger and
>> press
>> again, all is well. Have you ever encountered this type of thing?
>
> One potential cause of this is dirty contacts between the lens and body.
>
> In the setup menu, "Wrench 1", there is the "RELEASE PRiORITY S" and
> "RELEASE PRIORITY C" settings. I have these set to on because I'm
> usually using manual lenses. If the connection to the lens is lost,
> the camera will refuse to let you trigger the shutter. (Instruction
> manual, page 22).
>
>
> AG
>
> --
> Ken Norton
> ken@xxxxxxxxxxx
> http://www.zone-10.com
> --
> _________________________________________________________________
> Options: http://lists.thomasclausen.net/mailman/listinfo/olympus
> Archives: http://lists.thomasclausen.net/mailman/private/olympus/
> Themed Olympus Photo Exhibition: http://www.tope.nl/
>
>
--
_________________________________________________________________
Options: http://lists.thomasclausen.net/mailman/listinfo/olympus
Archives: http://lists.thomasclausen.net/mailman/private/olympus/
Themed Olympus Photo Exhibition: http://www.tope.nl/
|