Olympus-OM
[Top] [All Lists]

Re: [OM] Cranky 4T hot shoe--suggestions?

Subject: Re: [OM] Cranky 4T hot shoe--suggestions?
From: Chuck Norcutt <chucknorcutt@xxxxxxxxxxxxxxxx>
Date: Mon, 14 Sep 2009 08:03:46 -0400
Then I think you need some advice from JH or Tim Hughes.

Chuck Norcutt

usher99@xxxxxxx wrote:
> Thanks Chuck.  The T28 fired OK from a T-cord hooked up to the T32 on 
> the 4T---whole rig on my Lepp II bracket.  A Viv 283 failed to fire
> last Nov on the 4T as well.  The T28 is the most frequent misbehaver on 
> the 4T though always seems fine on my back-up OM2 or 2N.
> Perhaps I am jostling something in the 4T.
> 
> Everything works fine tonight of course.
> 
> A flummoxed Dr. Cranky Flash
> 
> 
> 
> 
> 
> 
> 
> It doesn't sound to me as though the problem is external contacts on 
> the hot shoe or the flash units... you've scrubbed them to death. 
> Except for your T32 comment I would have said the problem is with the 
> T28. My suspicion is that the apparent randomness is a problem with the 
> wiring in the T28 and when you touch it or move it to another camera 
> you're affecting the outcome by jostling a wire and creating an open 
> circuit.
> 
> I'd suggest you go back to the T32 or another flash and see if you 
> really can create a failure with that flash on the 4T. Just for 
> completeness you might also want to test manual flash firing via the PC 
> connector on the 4T.
> 
> Chuck Norcutt
> 
> 
> usher99 [at] aol.com wrote:
> 
>      This had been a longstanding issue/irritant. Sometimes a T32 even 
> won't fire but seems to especially misbehave with my T28. This summer 
> the T28 did not fire after much effort with my new Z. 38 macro. I even 
> had an eraser in my pocket and used it prior. After disassembly of the 
> whole rig and once again careful cleaning with Ethyl acetate and the 
> eraser--seemed fine. Finally finished up another roll in the 4T and did 
> a dry run sans film today of my latest butterfly rig in anticipation of 
> an upcoming trip home----shutter seemed to lag. I estimated stayed open 
> like OM-2 for 1/15 sec or so because of insufficient flash. Another 
> cleaning and it seemed fine again. I had it CLA'd a few months ago and 
> of course it was on its best behavior when John had it. When I put the 
> T28 on an OM-2 when it didn't fire on the 4T, it was fine. This guy is 
> going on flash probation. Otherwise it is fine and there is no visible 
> issue with the hot shoe.
> 
>     Any comments appreciated.
> 
>     Mike
-- 
_________________________________________________________________
Options: http://lists.thomasclausen.net/mailman/listinfo/olympus
Archives: http://lists.thomasclausen.net/mailman/private/olympus/
Themed Olympus Photo Exhibition: http://www.tope.nl/

<Prev in Thread] Current Thread [Next in Thread>
Sponsored by Tako
Impressum | Datenschutz