Try this, John:
Switch the camera on and open the CF card door. The "Card-Cover Open"
message will appear on the LCD.
Simultaneously press the [>] (play) and "OK" buttons.
The firmware version of the camera and attached lens and flash will be
displayed on the camera's LCD monitor.
Press the following navigation buttons in sequence:
Up
Down
Left
Right
Press the shutter button all the way.
Use the navigation buttons to display:
Up - display Page 1
Right - display Page 2
Down - display Page 3
Left - diagnostic display
To return to normal camera operation shut the CF card door..
You need page 2, which shows the following:
R: 00XXXXXX shutter release count
S: 00XXXXXX flash exposures count
M: 00XXXXXX mirror lockup count
U: 00XXXXXX ultrasonic wave count
--
Piers
-----Original Message-----
From: olympus-owner@xxxxxxxxxx [mailto:olympus-owner@xxxxxxxxxx] On Behalf
Of John ORegan
Sent: 17 May 2007 13:03
To: olympus@xxxxxxxxxx
Subject: [OM] Exposure Count
Is there a way to tell the number of exposures made by an E-dslr?
I just want to check the veracity of a 'little used' claim on a second-hand
E-1.
Thanks
JohnOR
___________________________________________________________
Now you can scan emails quickly with a reading pane. Get the new Yahoo!
Mail. http://uk.docs.yahoo.com/nowyoucan.html
==============================================
List usage info: http://www.zuikoholic.com
List nannies: olympusadmin@xxxxxxxxxx
==============================================
==============================================
List usage info: http://www.zuikoholic.com
List nannies: olympusadmin@xxxxxxxxxx
==============================================
|