Tim,
What would you venture the guage of the wire is that feeds the T28 flash heads?
I would think that it's not 14 guage or larger for that 10's of amps. I would
have thought the matching the wire size and voltage insulation property for a
mid-wire splice would be the key.
If I were chopping in mid-wire (and acknowledging the fact that I just blew the
resale value to hell) I would think that crimp on butt splice with a judicious
amount of electrical tape would do the trick.
Johann,
What are the subject distances and lens setups? The macro flash holder does
limit you to a 49 / 55 mm lens but you do get 360 degree movement of the flash
heads. Is this field use or studio stuff? Bellows or 65-116 Tube?
We can get this designed for you, we can spend your money.
Remember, our advice is free and worth what you paid for it.
Jay
>Thank you for that comment. I was actually going to ask for some advice on
>the wire as there is a lot of current going through there I assume. I am
>not sure however if I will cut it and splice new part into it. I would
>rather try to make a plug & receptacle that goes between the power unit and
>the flash head plug. But before I try any of that I am going to see if
>moving the power unit to the front of the lens is enough for my needs (the
>idea is to put the flash heads on goosenecks so they can be moved freely
>around in all directions).
>
>J
>
>> Be aware if you add your own plug and cable in between, as others have
>> suggested, it has to be
>> low resistance wire and in case of connectors high current rated. The peak
>> currents are well over
>> 100A and although the connector does not have to continuously carry that,
>> never the less, it
>> should be rated at, at least 10's of amps.
>>
>> Tim Hughes
==============================================
List usage info: http://www.zuikoholic.com
List nannies: olympusadmin@xxxxxxxxxx
==============================================
|