IF that is what you mean, you'll need to modify the pack. The test
button frame is plastic and epoxied into the chassis. Often the epoxy
fails, the frame pushes in and shorts the test led to the always "on"
position. What we used to do at Olympus (for UPI) was install a 1.4mm
set screw through the edge of the chassis to hold the plastic frame in
place (along with a new bead of epoxy. )
Also, the test button itself may just get grimy and get jammed in when
pressed.
___________________________________
John Hermanson
Camtech Photo Services, Inc.
21 South Lane, Huntington NY 11743
631-424-2121 | Olympus OM Service since 1977
http://www.zuiko.com | omtech1 AT verizon.net
Darin wrote:
>
> Snip
>
>>Check light is red after leaving it on charger for 5 or 6 hours. It
>>works
>>and does the red light tell of bad things to come. Battery was
>>completely run
>>down. Probably hadn't been charged in a year or more.
>>
>>Any fortune tellers out there? <{8^) Bill Barber
>>
>
>
> Bill,
>
> Do you mean that the red check light is on by itself? If that's the case,
> then the test button is likely jammed. I hope that helps, unfortunately I
> don't know how to fix it.
>
> Darin
>
>
==============================================
List usage info: http://www.zuikoholic.com
List nannies: olympusadmin@xxxxxxxxxx
==============================================
|